Zte Blade V50 Design 5G - Changing the System Language; Switching to Vibration or Silent Mode

27
Changing the System Language
1. Open Settings and touch System > Languages and
input > Languages. The first language in the list is the
default system language.
2. Touch Add a language and then the language you need.
Select the regional variant of the language if prompted.
3. Touch and hold a language and move it to the top to switch
to that language.
NOTE:
To remove languages from the list, touch > Remove and select
the languages you want to delete.
Switching to Vibration or Silent Mode
You can set the phone to vibration or silent mode by using one of
the following methods.
 Press the Volume key up or down and then touch the icon
below the slider to switch the phone to vibration or silent
mode or turn on the sound.
 Press the Volume up key and the Power key at the same
time to switch to silent mode or vibration mode.
NOTE:
You can select to switch to silent or vibration mode by
opening Settings > Sound and vibration > Switch to
silent/vibrate and choosing Mute or Vibrate.