EasyManua.ls Logo

Zte Blade V6 - Connecting to Wi-Fi

Zte Blade V6
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
To set the APN to default settings, touch the > Reset to
default.
Connecting to Wi-Fi
®
Wi-Fi is a wireless networking technology that can provide
Internet access at distances of up to 100 meters, depending on
the Wi-Fi router and your surroundings.
Turn Wi-Fi On and Connect to a Wi-Fi Network
1.Touch the Home Key > > Settings > Wi-Fi.
2.Slide the Wi-Fi switch to the ON position to turn on Wi-Fi.
3.Touch a network name to connect to it.
4.If the network is secured, enter the password and touch
Connect.
NOTE:
Your phone automatically connects to previously used Wi-Fi
networks when they are in range.
Get Notified of Open Networks
1.Touch the Home Key > > Settings > Wi-Fi.
2.Slide the Wi-Fi switch to the ON position.
3.Touch the
> Advanced.
4.Check Network notification.
When Wi-Fi is on, you receive notifications in the Status bar
when your phone detects an open Wi-Fi network. Uncheck

Table of Contents

Other manuals for Zte Blade V6

Related product manuals