Installing Your OBD II Device
1. Make sure your vehicle is parked outside in a safe location
and the engine is turned off.
2. Find your vehicle’s On-Board Diagnostics (OBD II) connector
port.
NOTES:
The OBD II port is usually located under the driver’s dash
side of your car, often within 18 inches of the steering
wheel (as 1 to 8 shown in the following picture).
Write down the Wi-Fi SSID and Password information.
If you’re having trouble locating your car’s OBD II port,
reference your vehicle’s manual.
3. Plug your device into the vehicle’s OBD II port.
To Next Page
Loading...