Zte KIS LITE - Page 62

62
Touch to enter the left letter on the key; Double-tap or flick
right to enter the right letter/symbol on the key. If word
prediction is enabled (
), just touch the keys and choose
the right word.
To enable and use TouchPal Curve:
1. In the TouchPal keyboard screen, touch
and tick
the Curve check box, and then touch Close.
2. Move your finger from letter to letter on the keyboard to
trace a word without lifting the finger until you reach the
end of the word.
NOTE: TouchPal Curve is only available in the Full
QWERTY layout.
TIPS:
• Touch when you want to. If you want to enter a single letter,
go ahead and touch.
• Lift your finger at the end of the word. A space is added
automatically when you begin to trace the next word.
Start of the word
End of the word