Zte MF90 - Legal Information

Accessing the Internet
4G Mode
After the client connected to your device successfully, you can access
the Internet in the Automatic or Manual mode. The default mode is
Automatic.
Mode Operations
Automatic
Your device will connect to the Internet automatical-
ly, and your clients can surf on the Internet directly.
Manual
1. Log in the 4G Mobile Hotspot page.
2. Select Settings > Network Settings > Dial-up
Settings> WAN Connection Mode > Manual,
and then click Apply.
3. Select Home, and then click Connect or Dis-
connect.
NOTE:
If you want to modify the detailed parameters of your device, please log
in the 4G Mobile Hotspot page by visiting http://192.168.0.1 or http://u.
ztedevice.com. The default password is admin.
Internet Wi-Fi Mode
1. Log in the 4G Mobile Hotspot page.
2. Select Settings > Internet Wi-Fi.
3. Enable the Internet Wi-Fi Switch, and then click Apply.
4. Connect to the WLAN device.
There are two methods for your reference.
u
Select the WLAN device which will be listed in the Wi-Fi Hot-
spot area, and then click Connect.
u
Click Add, input the WLAN device information in the Add Wi-Fi
Hotspot area, and then click Apply.
5. After the client connected to the WLAN device successfully, you can
access the Internet.
Conguring Your PC
Follow the following steps and gures for Windows XP to congure the
Internet Protocol for your Wi-Fi connection.
1. Right-click My Network Places, and then select Properties.
2. Right-click Wireless Network Connection, and then select Prop-
erties.
3. Select Internet Protocol(TCP/IP), and then click Properties.
4. Select Obtain an IP address automatically and Obtain DNS
server address automatically, and then click OK to nish the con-
guration.
Warning and Notice
To the Owner
• If inadequately shielded, some electronic devices may be affected
by the electromagnetic interference caused by the modem, such
as the electronic system of vehicles. Consult the manufacturers of
such devices before using the modem if necessary.
11 12 13 14 15
Troubleshooting
Problem Suggested Solution
Can not establish
the USB connection
between your device
and PC.
• Install the software, and run the installa-
tion program in the path of My Computer.
• If the driver of your device is abnormal,
please reinstall the software. You need to
uninstall the software rst.
Can not establish
the Wi-Fi connection
between your device
and client.
• Make sure the Wi-Fi function is active.
• Refresh network list and select the correct
SSID.
• Check the IP address to make sure your
client can obtain an IP address auto-
matically in the Internet protocol (TCP/IP)
properties.
• Type the correct network key (Wi-Fi pass-
word) when you connect to the device.
The client connected
to the device can not
access the Internet.
• Make sure your (U)SIM card is available.
• Change the location to nd a place with
good signal.
• Check WAN Connection mode setting.
• Contact with your service provider and
conrm your APN settings.
Problem Suggested Solution
When I use Internet
Wi-Fi mode, the client
cannot access the
Internet.
• Make sure the other WLAN device has
already connected to the Internet.
• Make sure that the subnet of your device
and the other WLAN device is different
Can not visit the 4G
Mobile Hotspot page.
• Enter the correct address. The default
address is http://192.168.0.1 or http://u.
ztedevice.com.
• Only use one network adapter in your PC.
• Do not use any proxy server.
About the password
• For the Wi-Fi connection password,
please check the label on the device.
• The default password of the 4G Mobile
Hotspot page is admin.
• If you changed the password and forgot
the new password, you need to restore
the device to the factory default settings.
For more assistance, please:
• Send E-mail to mobile@zte.com.cn
• Visit www.ztedevice.com
• Call Service Hotline: +86–755–26779999
19 20
• Operating the modem may interfere with medical instruments such
as hearing aids and pacemakers. Always keep the modem more
than 20 centimeters away from such medical instruments when
your modem is turned on. Turn the modem off if necessary. Consult
a physician or the manufacturers of medical instruments before us-
ing the modem if necessary.
• Be aware of the usage limitation when using the modem at places
such as oil warehouses or chemical factories, where there are ex-
plosive gases or explosive products being processed. Turn off the
modem if necessary.
• Do not use electronic transmission devices in aircrafts, at petrol sta-
tions or in hospitals. Observe and obey all warning signs, and turn
off the modem in these conditions.
• Do not touch the inner antenna area unless it is necessary. Other-
wise the performance of the modern may be affected.
• Keep the modem out of the reach of little children. The modem may
cause an injury if used as a toy.
• When the modem is operating, do not touch the metallic parts. Fail-
ing to do so may cause burns.
Using Your USB Modem
• Use original accessories or accessories that are authorized. Using
any unauthorized accessories may affect the performance of the
modem and violate the related national regulations about telecom
terminals.
• Avoid using the modem near or inside metallic structures or es-
tablishments that can emit electromagnetic waves, because signal
reception may be affected.
• The modem is not waterproof. Keep the modem dry and store it in a
shady and cool place.
• Do not use the modem immediately after a sudden temperature
change. In such case, dew may be generated inside and outside
the modem, so do not use it until it becomes dry.
• Handle the modem carefully. Do not drop, bend or strike it. Other-
wise the modem may be damaged.
• Only qualied personnel can dismantle and repair the modem.
• An operating temperature between -10°C and +60°C and a humid-
ity between 5% and 95% are recommended.
Limited Warranty
• This warranty does not apply to defects or errors in the product
caused by:
i. Reasonable abrasion.
ii. End users’ failure to follow ZTE’s installation, operation or main-
tenance instructions or procedures.
iii. End users’ mishandling, misuse, negligence, or improper installa-
tion, disassembly, storage, servicing or operation of the product.
iv. Modications or repairs not provided by ZTE or a ZTE-certied
individual.
v. Power failures, surges, re, ood, accidents, and actions of third
parties or other events outside ZTE’s reasonable control.
vi. Usage of third-party products, or usage in conjunction with third-
party products if such defects are due to the combined usage.
vii. Any other cause beyond the range of normal usage intended for
the product.
End users have no right to reject or return the product, or receive a re-
fund for the product from ZTE under the above-mentioned situations.
• This warranty is end users’ sole remedy and ZTE’s sole liability for
defective or nonconforming items, and is in lieu of all other war-
ranties, expressed, implied or statutory, including but not limited to
the implied warranties of merchantability and tness for a particular
purpose, unless otherwise required under the mandatory provisions
of the law.
Limitation of Liability
ZTE shall not be liable for any loss of prots or indirect, special, inci-
dental or consequential damages resulting from or arising out of or in
connection with using of this product, no matter whether or not ZTE
had been advised, knew or should have known of the possibility of
such damages, including, but not limited to lost prots, interruption of
business, cost of capital, cost of substitute facilities or product, or any
downtime cost.
16 17 18