36
NOTES:
• Your phone’s battery should have enough charge for the
phone to turn on and nd a signal, run the setup application,
set up voicemail, and make a call. You should fully charge
the battery as soon as possible.
• If your phone is brand new or has not been used for some
time, you may not see any indication that the phone is being
charged at rst. This is caused by over-drained battery
and your phone will return to normal after enough time of
charging.
Insert nano-SIM Card
Follow these instructions to insert a nano-SIM card. Remember
to power off your phone before inserting a nano-SIM card.
NOTE:
Your phone’s nano-SIM card is preinstalled. These instructions
are for reference only.
To Next Page
Loading...
