14
Once your ZTE Unite II is powered on and has
been activated, it automatically connects to the
Internet, provided that Mobile Broadband service
is available, and one or more Wi-Fi devices are
connected.
The Service (4G LTE™, 3G, and 1X), Signal
Strength , and Data Connected icons on your
ZTE Unite II indicate it is in service and ready to
connect.
Follow these Steps:
1. Use your normal Wi-Fi application on your com-
puter, or other Wi-Fi enabled device to establish a
connection to your ZTE Unite II.
2. Look for the network (SSID) named “USCC-
MF96U-XXXX”. XXXX varies from device to de-
vice.
3. Click Connect and enter the default password
printed under the battery of your ZTE Unite II.
NOTE:
You can check the label on your device or select De-
vice Info on the LCD screen to get the SSID and con-
nection password.
To Next Page
Loading...
