Need help?Do you have a question about the Zte OPTUS MF920V and is the answer not in the manual?
Network| 4G LTE bands | 700, 1800, 2300, 2600 MHz |
|---|---|
| 3G UMTS bands | 900, 2100 MHz |
| GSM bands | 900, 1800 MHz |
Data Rates| 4G download speeds | up to 150 Mbps |
|---|---|
| 3G DC-HSPA+ mode speed | up to 42 Mbps |
| Wi-Fi standard | 802.11 a/b/g/n, 2x2 MIMO, 2.5GHz |
Power| voltage | 5 V |
|---|---|
| resting current | 100 mA rms |
| max current | 500 mA rms |
Operating Environment| operating temperature | -5ºC to +45ºC |
|---|---|
| battery capacity | 2000 mAh |
| charge time with charger | up to 3 hours |
Weight and Dimensions| dimensions | 105.6 x 63.8 x 14.38 mm |
|---|---|
| weight | 100 g |
Identifies the physical parts and indicator lights of the 4G Wi-Fi hotspot device.
Details supported SIM types, adaptor warnings, and practical tips for SIM card insertion.
Explains the meaning of various LED lights indicating battery status, Wi-Fi, messages, and network signal.
Steps to connect multiple devices wirelessly to the hotspot for internet access.
Provides the browser homepage address and default login credentials for the hotspot interface.
Procedure for restoring the Wi-Fi hotspot to its original factory default settings.
Adjust connection mode settings, including automatic, manual, and roaming options.
Select preferred network technologies like 4G, 3G, or 2G, or use automatic selection.
Set up Access Point Name (APN) details for network provisioning, including manual entry.
Control Wi-Fi broadcast, change network name (SSID), and manage broadcast visibility.
Set up security mode, password, and limit the maximum number of connected devices.
Select Wi-Fi coverage range settings for battery life optimization or extended range.
Set the timer for Wi-Fi sleep mode to conserve power during periods of inactivity.
Configure the device's IP address, subnet mask, and DHCP server settings.
Adjust Maximum Transmission Unit (MTU) and Maximum Segment Size (MSS) parameters.
Manage firewall settings: port filtering, port mapping, UPnP, DMZ, and system security.
Configure automatic firmware update checks and set the update cycle.
Options for resetting the device to factory defaults and configuring fast boot mode.
Step-by-step guide for installing the hotspot software on Windows using a USB connection.
Key information about USB installation, support channels, and application uninstallation.
Details on factors affecting battery life and precautions related to device temperature during charging.
Solutions for problems connecting to Wi-Fi, including password issues and factory resets.
Addresses issues with the user interface not starting and the Wi-Fi hotspot having no signal.
Resolves SIM card lock errors and data connection failures, including PIN/PUK management.
Guidance on electromagnetic interference and safe usage near medical devices.
Recommendations for safe operation in hazardous environments and proper handling of the device.
Advice on protecting the device from damage due to environmental factors and improper use.
Information on radio frequency safety, antenna performance, and adherence to SAR standards.
Explanation of radio frequency energy transmission and optimization for performance.
Details network compatibility bands (4G, 3G, GSM) and physical dimensions of the device.
Covers data rates, Wi-Fi standards, voltage, current, operating systems, and temperature limits.
Information on battery capacity, charging time, standby time, and operational usage time.
To Next Page
