Zte ZMAX - Page 48

46
Connect to a WPS Network
WPS (Wi-Fi Protected Setup) is a feature that makes it easy to add your
phone to access points which support WPS.
You can use one of the following two methods to connect your phone to a
wireless network using WPS.
Method one: WPS button
1. Touch the Home Key > Menu Key > System settings > Wi-Fi.
2. Slide the Wi-Fi switch to the ON position.
3. Touch .
4. Press the WPS button on the access point and the access point will
recognize your phone and add it to the network.
Method two: PIN number
1. Touch the Home Key > Menu Key > System settings > Wi-Fi.
2. Slide the Wi-Fi switch to the ON position.
3. Touch the Menu Key > WPS Pin Entry.
4. The WPS Pin number displays on the screen. Enter the Pin number
into the access point’s setup page.
After entering the Pin number, your phone automatically nds the access
point and congures the connection.
NOTE: For detailed information about the WPS feature of the access
point, please refer to its user documents.