Zte ZXV10 W300 - 4.5 WAN and Wireless Settings

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.
This page configures the ZXV10 W300 IP address and subnet
mask on the LAN side.
Do not modify the configurations in this page if there are no
special requirements.
3. WAN settings, as shown in
FIGURE 9.
FIGURE 9 WAN Setting
This page configures the ZXV10 W300 IP address and subnet
mask on the WAN side.
4. Wireless setup
1) Basic wireless LAN settings: Set basic data, as
shown in
21