Zte ZXV10 W300 - 4 Wizard Configuration; 4.1 Logging On to the Device

Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.
15
4 Wizard
Configuring the ZXV10 W300 device requires professional
technical knowledge and experience. To simplify your
procedures, it is recommended to use the Wizard.
In the Wizard, you need to configure only few data to
establish a connection and enable the basic functions.
However, to use advanced functions of the device, you need to
configure other options.
4.1 Logging on to the ZXV10 W300 Device
Visit http://192.168.1.1 via a browser and log on to the ZXV10
W300. Select Wizard to complete the basic configurations, as
shown in
FIGURE 4.
FIGURE 4 Logging on to the ZXV10 W300 Device