Zultys 47G User Manual

page 1
rev 5.21.18
(800) 752-6110YipTel.com
YipTel Enterprise Zultys 47G User Guide
Name: Direct Line: Extension: Password: VMail Pin:
ZULTYS 47G
Message Waiting
TRAINING VIDEO AVAILABLE
Visit www.yiptel.com then click Resources and then Training Center. For
additional questions, call (800) 752-6110 or email myservice@yiptel.com.
TO SET UP AND ACCESS YOUR VOICE MAIL
Press the Message button. It will then ask for a password, use the dial pad
to enter the PIN listed above. Follow the instructions to record your name,
greeting and password.
TO REMOTELY ACCESS YOUR VOICEMAIL
Call your direct phone number and when your greeting answers press * on your
keypad followed by your personal PIN. If you do not have a direct phone number,
call your main number, ask to be transferred to your voicemail and press * when
you hear your greeting.
TO ANSWER YOUR PHONE
Lift the handset, or press the Speaker button, or press the Headset button.
Press again to hang up.
TO ANSWER WHILE ON A CALL
Press the Answer button in the display. The current call you are on will be placed
on hold automatically and you will be connected to the incoming call.
HOLD
While on a call press the Hold button. To pick up a held call, highlight the call in
the display then press Resume or simply press the Hold button again.
Transfer
Mute
Redial
Message
Headset
Hold
Volume
Speaker

Zultys 47G Specifications

General

Handset Connector	RJ9
Ethernet Ports	2 x 10/100/1000 Mbps
Power Supply	PoE (802.3af)
Features	Call forwarding, call waiting, voicemail, conferencing
Protocols	SIP
Speakerphone	Full-duplex
Voice Codecs	G.711, G.729
Lines	6
Power	PoE (802.3af)

Summary

Core Phone Operations

Voicemail Access

Instructions for setting up, accessing, and remotely accessing voicemail using the phone and PIN.

Answering and Holding Calls

Methods to answer incoming calls and place calls on hold or resume them.

Managing Calls During Conversation

How to answer a new call while on an existing call, placing the current call on hold.

Advanced Call Handling

Call Parking and Retrieval

Procedures for placing calls on system hold (park) and retrieving them using a park ID.

Call Transfers

Instructions for performing supervised, blind, and voicemail transfers.

Conference Calls

Steps to initiate and manage conference calls with multiple participants.

Call Pickup and Intercom

How to answer calls at other extensions and use the intercom feature.