Configuring your Phone
Quick Installation Guide
Configuration of the phone is centrally managed from the Zultys MX IP phone system. For
most deployments the phone will receive an IP address from the DHCP server on the local
network. For the phone to automatically download its configuration information the DHCP
server must have Option 66 enabled and configured with the address of the Zultys MX IP
phone system. For further information about configuration of the phone please refer to the
ZIP 33i Administration Manual.
80mm/3.15”
For more information, refer to ZIP 33i User Guide. 96-35331-01
ZIP 33i Business Phone
Wall Mount Drilling Template
Drill two holes vertically spaced 80mm/3.15” apart.
After the IP phone is connected to the network
and supplied with power, it automatically
begins a process of initializing on the network
and downloading it's configuration information.
Contact your system administrator if the phone
fails to register with the IP phone system.
Initializing
Please wait
Startup
To Next Page
Need help?
General
