ZUMEX Speed S +plus - Page 5

Speed S
+plus
Versatile Pro
|
Extraction unit
Unit assembly instructions
Check that all of the components are present and correct:
1
Install the peel ejectors
2
1 Fit the peel ejectors together with their
brackets, making sure that the extractor
is positioned correctly on the pressing
unit slot.
1 INJ. PLASTIC KNOB
2 RIGHT PEEL EJECTOR
3 LEFT PEEL EJECTOR
4 BLADE HOLDER
5 FRONT HOLDER
6 REAR HOLDER VERSATILE OR SPEED
7 LOWER PRESSING
8 UPPER PRESSING
www.zumex.com
En