To Next PageTo Next Page
Need help?Do you have a question about the ZUMEX Z-450 and is the answer not in the manual?
Steps for assembling the lift component of the juicer.
Instructions for mounting the fruit-holding hopper onto the lift.
Steps for securing the fruit return channel to the hopper and lift.
Instructions for connecting and mounting the transporter unit.
Details on starting and running the Z-450 juicer.
How to adjust the juicer speed using the control panel potentiometer.
Important safety information and emergency stop procedures for the juicer.
Procedures and recommendations for cleaning the Z-450 juicer.
Steps for safely removing the blade and its support for cleaning or maintenance.
Instructions on how to disassemble the filter for cleaning.
Procedure for removing the peel outlet for cleaning.
Maintenance procedures specific to the juicer head unit.
Guidelines for replacing pressing unit axles and checking blade sharpness.
Recommended schedule for changing the filter brush and retainer.
Procedures for changing retainers and aligning hubs in the juicing heads.
Checks for motors and reducers, oil leaks, and electrical connections.
Checks for the connection panel and control panel components and wiring.
Visual inspection of the machine's general condition and parts.
Maintenance tasks for the transporter belt, bearings, motor, and reducer.
Maintenance for the lifting unit's chain, bearings, motor, and reducer.
General
