Do you have a question about the ZURN Aquaflush Z6001 and is the answer not in the manual?
Application | Commercial |
---|---|
Fixture Type | Water Closet |
Flush Type | Manual |
Valve Type | Diaphragm |
Operating Pressure | 15 - 100 psi |
Water Consumption | 1.6 GPF |
Flush Valve Type | Piston |
Material | Brass |
Inlet | 1" IPS |
Lists available Aquaflush Exposed models and highlights critical safety warnings, including those for cancer and reproductive harm.
Technical specifications of the ZURN Aquaflush Exposed Flush Valve, including material and feature descriptions.
Details on different ZURN Aquaflush models and their associated flow rates (e.g., HET, WS1, ULF) for various fixtures.
Essential pre-installation steps and important notes for installing the sweat solder adapter, emphasizing code compliance and protection of finishes.
Visual and textual instructions for the correct installation procedure of the sweat solder adapter onto the water supply pipe.
Instructions on assembling the stop valve, tailpiece, and ensuring proper O-ring seal before connecting to the flush valve.
Guidance on determining vacuum breaker tube length and connecting the vacuum breaker tube assembly and spud nut to the fixture.
Detailed steps for flushing the supply piping to remove debris before final valve operation, ensuring system cleanliness.
Procedure for adjusting the control stop to achieve optimal flush volume and evacuation for the installed fixture.
Visual guide with numbered parts identifying components of the Aquaflush Exposed Flushometer for repair or replacement.
Listing of all available repair kits and individual parts, categorized by function (covers, stops, handles, etc.) for easy ordering.
A guide to diagnosing and resolving typical problems encountered with the flush valve's operation, including causes and corrective actions.
Best practices for maintaining the chrome finish and preparing the valve for seasonal shutdowns to prevent damage.