ZURN ZER6000AV-CPM User Manual

ZER6000AV-CP
ZER6000AV-CPM
LIMITED WARRANTY
All goods sold hereunder are warranted to be free from defects in material and factory workmanship for a period of three years from the date of
purchase. Decorative nishes warranted for one year. We will replace at no costs goods that prove defective provided we are notied in writing
of such defect and the goods are returned to us prepaid at Sanford, NC, with evidence that they have been properly maintained and used in
accordance with instructions. We shall not be responsible for any labor charges or any loss, injury or damages whatsoever, including incidental
or consequential damages. The sole and exclusive remedy shall be limited to the replacement of the defective goods. Before installation and
use, the purchaser shall determine the suitability of the product for his intended use and the purchaser assumes all risk and liability whatever in
connection therewith. Where permitted by law, the implied warranty of merchantability is expressly excluded. If the products sold hereunder are
“consumer products,” the implied warranty of merchantability is limited to a period of three years and shall be limited solely to the replacement of
the defective goods. All weights stated in our catalogs and lists are approximate and are not guaranteed.
Sensor-Operated, Battery-Powered
Closet/Urinal Systems
ZER6000AV-CPM
ZER6000AV-WS1-CPM
ZER6001AV-CPM
ZER6001AV-WS1-CPM
ZER6003AV-CPM
ZER6003AV-WS1-CPM
ZER6003AV-CP
ZER6003AV-CPM
AquaSense AV
TM
ZER Series
Automatic Sensor-Operated,
Battery-Powered Flushometer
Installation, Operation, Maintenance
and Parts Manual
Patented and Patents Pending
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
ADVERTENCIA: Cáncer y daño reproductivo - www.P65Warnings.ca.gov
AVERTISSEMENT: Cancer et effets néfastes sur la reproduction - www.P65Warnings.ca.gov

ZURN ZER6000AV-CPM Specifications

General

Model	ZER6000AV-CPM
Type	Automatic Sensor Flush Valve
Input Voltage	24 VAC/VDC
Flush Volume	1.6 GPF
Sensor Range	Adjustable
Operating Pressure	20 psi - 80 psi
Voltage Rating	24 VAC/VDC
Operating Temperature	32°F to 104°F

Summary

ZER Series Automatic Flushometer Manual

Installation, Operation, Maintenance and Parts

Covers installation, operation, maintenance, and parts for ZER Series flushometers.

Closet/Urinal Systems Overview

Overview of sensor-operated, battery-powered closet and urinal systems.

Safety Warning: Cancer and Reproductive Harm

Warning regarding cancer and reproductive harm as per P65Warnings.ca.gov.

Limited Warranty Information

Details the warranty terms for ZURN products, including duration and exclusions.

Prior to Installation

Important Installation Notes

Key considerations for plumbing, water supply, and system flushing before operation.

Operating Pressure Specifications

Specifies the required operating water pressure range for ZER flushometers.

Care and Tool Usage

Advice on protecting the fixture finish and avoiding specific tools during installation.

Step 1: Install Stop Valve Assembly

Guide for installing the stop valve assembly using appropriate fittings and sealants.

Step 2: Prepare Flush Valve Tailpiece

Instructions for preparing the flush valve tailpiece, including O-ring placement and lubrication.

Step 3: Connect Tailpiece and Tighten

Details on inserting the tailpiece, tightening the lock nut, and plumbing the unit.

Step 4: Install Vacuum Breaker Tube

Guidance on measuring, cutting, and assembling the vacuum breaker tube and spud nut.

Step 5: Final Tightening and Water Turn-On

Instructions for final tightening of components and when to turn on the water supply.

Activation Procedure

Battery Installation and Activation

Steps for installing batteries using the compartment wrench to activate the E-Z Flush unit.

Factory Presets and Adjustments

Information on factory presets and how to adjust activation distance if needed.

Start-up Sequence and Sensor Behavior

Description of the 10-minute start-up sequence and sensor LED behavior.

Visual Indicator Guide

Explanation of LED indicators (User-In-View, Object Lock Sensor, Battery) and their meanings.

Adjusting Your E-Z Flush

Instructions and diagrams for adjusting the E-Z Flush unit's sensor sensitivity.

Stop Valve Adjustment and Water Turn-On

Stop Valve Adjustment Method

Details on using the adjusting screw to operate and adjust the stop valve.

Flush Volume and Pressure Regulation

Guidance on adjusting stop valves for proper flush volume and fixture evacuation.

System Flushing Procedure

Procedure for flushing supply piping to remove debris before and after operation.

Appendix A: Adjusting Activation Distance

Detailed steps to adjust the Object Lock Sensor activation distance using the sensor adjustor tool.

Wiring Diagram and Controls

Modes of Operation Switch

Explanation of the different modes available on the operation switch (Delay Flush, 24 HR Flush).

Object Detection Range Adjustment

Information on adjusting the object detection range using the sensor adjustment tool.

Trouble Shooting Guide

Guide to identify and resolve common problems with the flushometer's operation.

AquaVantage Exposed E-Z Flush Repair Kits

Part Identification

List and diagram of all individual parts for the flushometer.

Covers and Repair Kits

Catalog of available covers and specific repair kits for different flush volumes.

Control Stop Repair Kit and Parts

Details on repair kits and parts specifically for the control stop mechanism.

Adjustable Tailpieces

Information on adjustable tailpieces and coupling assemblies for fixture connection.

Repair Parts - Inside Parts

Listing of internal repair parts such as relief valves.

Flush Connections and Spud Coupling Kits

Repair kits and parts for flush tube assemblies and spud couplings.

Handle Assembly and Repair Kits

Available handle assemblies and repair kits, including sensor components.