Zwave Everspring EVR_ST814 - Command Classes; Technical Data

9 (c) 2012 Z-Wave Europe GmbH, Goldbachstr. 13, 09337 Hohenstein-Ernstthal, Germany, www.zwaveeurope.com
99 Disable (Default)
Humidity Trigger OFF value (Parameter Number 5, Parameter Size 1) Humidity level when a OFF command is
sent out
Value Description
20 — 90 Tigger Off on
99 Disable (Default)
Auto Report Time (Parameter Number 6, Parameter Size 2) Sets the time interval when a sensor report is sent
Value Description
0 Disable (Default)
1 — 1439 Auto report periodically
Auto Report Temperature (Parameter Number 7, Parameter Size 1) Sets the temperature change causing a
sensor report
Value Description
0 Disabled (Default)
1 — 70 Auto report on temp. change
Auto Report Humidity (Parameter Number 8, Parameter Size 1) Sets the humidity change causing a sensor
report
Value Description
0 Disable (Default)
5 — 70 Auto report on humidity change
Command Classes
Supported Command Classes
Basic (version 1)
●
Multi Channel (version 2)
●
Wake Up (version 2)
●
Association (version 2)
●
Version (version 1)
●
Battery (version 1)
●
Configuration (version 1)
●
Multilevel Sensor (version 2)
●
Manufacturer Specific (version 1)
●
Technical Data