How to connect ASI6200MM Pro to 2″ EFW/M54 filter drawer and M68 OAG?
How many solutions there are for ASI6200MM Pro to get 55mm back focus length?
How to connect ASI6200MM Pro to the M68-thread telescope side?
If you are still stressed with these problem, then this tutorial is exactly what you are looking for.
The first one is using the 2”EFW, M68 OAG and the 5mm sensor tilt adapter.
ASI6200(12.5mm) + 2”EFW(20mm) + M68 OAG(17.5mm) + sensor tilt adapter(5mm)=55mm back focus length.
This is the very first and also the most recommended connection solution. The combination of the mono full-frame camera
and 2”filter wheel can create many possibilities on your astrophotos. It’s very suitable for the middle and high-level
astrophotographers.
' December 19, 2019 ( ZWO ASI Camera ) Tutorials 46 Comments
Connection methods of ASI6200MM Pro, 2” EFW/M54 filter drawer and M68 OAG
To Next Page
Need help?
General
