Need help?Do you have a question about the Zycoo CooFone-D30 and is the answer not in the manual?
General| Network Interface | 10/100 Mbps Ethernet |
|---|---|
| Power over Ethernet | Yes |
| Line Keys | 2 |
| Headset Jack | RJ9 |
| Speakerphone | Full-duplex |
| SIP Accounts | 2 |
| Audio Codecs | G.711, G.722, G.729 |
| Protocols | SIP, TCP/IP, UDP, HTTP/HTTPS, RTP/SRTP, DHCP, DNS, PPPoE, STUN |
| Power Supply | DC 5V/1A |
| Supported Languages | English, Chinese |
Technical specifications for the D30(P) IP Phone, including adapter, port, power, and dimensions.
Details the voice capabilities of the D30(P) phone, such as SIP support, codecs, and call control.
Describes network functionalities like WAN/LAN support, VLAN, NAT, and VPN.
Covers firmware upgrade, management, and auto-provisioning features.
Guides on connecting the D30(P) IP Phone to power and network.
Instructions for connecting the power adapter to the D30(P) IP Phone.
Details on configuring network settings like Static IP, DHCP, and PPPoE.
Guides on initiating calls using the D30(P) IP Phone.
Details how to configure call forwarding for incoming calls.
Guides on performing blind, attended, and alert transfers.
Manages SIP and IAX2 accounts for phone registration.
Configures advanced network settings.
Manages security settings like passwords and access control.
Covers auto-provisioning, backup, and upgrade options.
Resets the phone to factory default settings.
To Next Page
