Need help?Do you have a question about the Zycoo CooVox U80 and is the answer not in the manual?
General| Model | CooVox U80 |
|---|---|
| Type | IP PBX |
| Max Users | 80 |
| Network Interface | 2 x 10/100/1000 Mbps Ethernet |
| Power Supply | AC 100-240V, 50/60Hz |
| FXS Ports | 8 |
| Operating System | Linux |
| Operating Temperature | 0°C to 40°C |
| Voicemail Storage | 10000 minutes |
| Protocols | SIP, IAX2 |
| Voice Codecs | G.711, G.729, G.722 |
| Video Codecs | H.264 |
| Processor | Dual Core 1GHz |
To avoid device damage and bodily injury, follow safety rules like keeping power off and using ESD protection.
Proper temperature and humidity are crucial for device operation and longevity. Avoid extreme conditions.
Dust accumulation can cause poor contact. Prevent static electricity damage by keeping the device clean and grounded.
External interferences can affect components. Use filtered power supplies and keep devices away from interference sources.
Protect against high voltage currents from lightning. Ensure proper grounding, cabling, and consider surge protective devices.
Tools required for installation include a Phillips screwdriver, ESD-preventive wrist wrap, and cables.
Instructions for installing modules and the IP PBX unit itself within a rack or other suitable environment.
Details on how to install various optional extension modules like FXS, FXO, GSM, WCDMA, E1, and BRI into the IP PBX.
Table outlining feasible module combinations for Slot 1 and Slot 2, along with rules for module installation.
Instructions for mounting the IP PBX device into a standard 19-inch rack using provided brackets and screws.
Guidance on connecting the device to ground to release lightning over-voltage and protect against electric shock.
Diagram and explanation of how to connect the IP PBX to PSTN, Router, Computer, and Power.
Explanation of the status and meaning of each LED indicator on the IP PBX for system and module status.
Steps to connect a PC, access the IPPBX via a web browser, and log in using default credentials.
Guide to configuring network settings, including WAN and LAN port setup, for the IP PBX system.
Instructions for configuring settings for E1 or BRI modules, as FXS/FXO/GSM/WCDMA modules have default settings.
To Next Page
