Need help?Do you have a question about the ZyXEL Communications ES-105/ES-108 and is the answer not in the manual?
General| Brand | ZyXEL Communications |
|---|---|
| Model | ES-105/ES-108 |
| Category | Network Router |
| Language | English |
Device complies with FCC Part 15 rules, subject to two conditions regarding interference.
Equipment complies with Class A digital device limits for commercial environments, warning about potential interference.
Warning for Class A product regarding potential radio interference in domestic environments.
Instructions on how to obtain warranty service, including contacting the service center and returning products.
Overview of the switch as a multi-port, store-and-forward device for high-speed SOHO networking.
Describes how the switch can be used standalone to connect computers, servers, and print servers in a small workgroup.
Step-by-step guide for installing the switch on a desktop, emphasizing proper placement and ventilation.
Identifies the RJ-45 ports and power port located on the rear panel of the ES-105 model.
Explains the auto-negotiation feature for 10/100 Mbps speeds and duplex modes on the switch's RJ-45 ports.
Details the auto-sensing MDI/MDIX capability for connecting devices using straight-through or crossover cables.
Information on using UTP/STP Ethernet cables for RJ-45 ports and their types based on speed requirements.
Detailed descriptions of the PWR, LK/ACT, and FD/COL LEDs, including their color, status, and meaning.
Troubleshooting steps for resolving issues when the switch's power LED does not light up.
Troubleshooting steps for resolving issues when the LK/ACT LED remains off despite a connected device.
Troubleshooting steps for addressing continuous blinking of the FD/COL LED, indicating potential network issues.
To Next Page