Need help?Do you have a question about the ZyXEL Communications EMG3525-T50C and is the answer not in the manual?
General| Device Type | Wireless Router |
|---|---|
| Wireless Standards | 802.11a/b/g/n/ac |
| Frequency Band | 2.4 GHz / 5 GHz |
| WAN Ports | 1 x Gigabit Ethernet |
| LAN Ports | 4 x Gigabit Ethernet |
| USB Ports | 1 x USB 2.0 |
| Power Supply | 12V DC, 1.5A |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Wireless Speed | Up to 1167 Mbps (300 Mbps on 2.4 GHz + 867 Mbps on 5 GHz) |
| Security | WPA2 |
| Storage Temperature | -30°C to 70°C |
| Humidity | 10% to 90% (Non-condensing) |
Provides an overview of the Zyxel Device series and the guide's scope, referencing model comparison tables.
Introduces the Web Configurator as an HTML-based interface for system setup and management.
Guides users through the initial setup wizard for time zone and WiFi configurations.
Details how to set up DSL or Ethernet Internet connections using the Broadband screens.
Explains how to set up a WiFi network, including security settings and WPS connection.
Details configuration of firewall rules, parental control, and MAC address filtering.
Explains the MPro Mesh network concept, including Controllers and Extenders.
Provides instructions for setting up MPro Mesh networks via WiFi or wired connections.
Details how to change the default WiFi SSID and password for enhanced security.
Explains how to configure Parental Control profiles to limit internet access by time.
Guides on setting up a separate guest WiFi network for visitors.
Explains how to enable or disable guest WiFi networks and configure SSIDs/passwords.
Describes how to view and manage Parental Control profiles and schedules.
Discusses Broadband screens for configuring WAN interfaces and Internet access.
Details how to change Zyxel Device's Internet access settings and configure WAN connections.
Explains how to set up a cellular dongle for Internet access as a backup connection.
Details enabling WiFi, entering SSID, and selecting security mode like WPA3-SAE.
Explains how to permit or exclude devices based on MAC addresses for wired connections.
Guides on configuring WiFi Protected Setup (WPS) for quick and secure connections.
Guides on setting the LAN IP address, subnet mask, and DHCP settings.
Guides on viewing and configuring static route rules to save time and bandwidth.
Defines Quality of Service (QoS) for data delivery with minimum delay and bandwidth control.
Introduces NAT for IP address translation between networks.
Guides on forwarding incoming service requests from the Internet to local network servers.
Explains how to use the firewall to protect the Zyxel Device and network from attacks.
Details setting the security level of the firewall based on packet direction.
Describes creating Access Control List (ACL) rules to accept, reject, or drop packets.
Explains MAC filtering for permitting or excluding wired clients based on MAC addresses.
Guides on enabling MAC Address Filter and adding host/MAC addresses.
Details configuring URL filtering settings to block users from accessing certain websites.
Explains parental control features for limiting internet access and content.
Guides on enabling parental control and configuring access schedules and URL filters.
Explains making calls over the Internet using VoIP and SIP.
Guides on setting up SIP accounts for VoIP calls.
Guides on creating or managing user accounts and their privileges.
Explains remote management controls via interfaces and web services.
Provides suggestions to solve potential problems categorized by type.
Offers solutions for issues like the Zyxel Device not turning on or LED behavior.
Provides troubleshooting steps for issues like forgetting the IP address or admin password.
Addresses common issues with accessing the Internet via various connection types.
Offers solutions for WiFi connection issues like inability to connect or slow performance.
Troubleshoots issues where the computer cannot detect UPnP settings from the Zyxel Device.
Lists important safety precautions for device installation, operation, and maintenance.
To Next Page