Step 1 Hardware Connections
Step 2 WiFi Connection
EX3301-TO
Dual-Band Wireless AX1800 Gigabit Ethernet IAD
If you need any assistance please call us on
0333 0155156 or email help@digitalhomeuk.com
www.digitalhomeuk.com
Package Contents
Device Power Cable Ethernet Cable Phone Cable Quick Start Guide Declaration of Conformity
Safety Warnings
Quick Start Guide
Use the yellow Ethernet cable supplied (CAT-5e, gigabit capable) to
connect the WAN port to Optical Network Termination (ONT) point.
Optional - connect a computer to the LAN port using an appropriate
(CSAT-5e) Ethernet cable, not supplied.
Connect the power cable to the Zyxel Device and press the power
button. Please wait 2 minutes for configuration to complete.
1
2
3
Use the SSID
and Wireless key on the device label to connect
wirelessly to the Zyxel Device.
On your smartphone or notebook, ind this SSID. Enter the
Wireless key to connect.
4-a
1
On - Internet is ready.
Blinking - Transmitting/receiving Internet data.
On - Temporary whilst attempting to get an IP address,
persistent if failed.
Off - Internet is not ready.
Green
Green
Red
Red
On
- Power is on.
Blinking - Starting up.
On - Malfunctioning.
Blinking - Upgrading rmware.
Using SSID
4-a
1 / 2
To Next Page
Need help?
General
