Chapter 17 VPN
FMG3024-D10A / FMG3025-D10A Series User’s Guide
168
This screen contains the following fields:
17.2.2 IPSec VPN: Add
Use these settings to add or edit VPN policies. Click Security > VPN > Add New Tunnel to open
this screen as shown next.
Table 50 IPSec VPN
LABEL DESCRIPTION
Add New Tunnel Click this button to add an item to the list.
# This is the VPN policy index number.
Active This displays if the VPN policy is enabled.
Tunnel Name The name of the VPN connection.
Local Address This displays the IP address of the Device.
Remote Address This displays the IP address of the remote IPSec router.
IPSec Algorithm This displays the encryption algorithm for the VPN connection.
Modify Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to delete an existing rule.
To Next Page
Loading...