FMG3024-D10A / FMG3025-D10A Series User’s Guide 215
CHAPTER 21
User Account
21.1 Overview
You can configure system password for different user accounts in the User Account screen.
21.2 The User Account Screen
Use the User Account screen to configure system password.
Click Maintenance > User Account to open the following screen.
Figure 111 Maintenance > User Account
The following table describes the labels in this screen.
Table 75 Maintenance > User Account
LABEL DESCRIPTION
User Name You can configure the password for the Power User and Admin accounts.
Old Password Type the default password or the existing password you use to access the system
in this field.
New Password
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays a (*) for each character you type. After you change
the password, use the new password to access the Device.
Retype to
Confirm
Type the new password again for confirmation.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
To Next Page
Loading...