Chapter 3 Tutorials
FMG3024-D10A / FMG3025-D10A Series User’s Guide
29
3.4.1.2 SIP Account Registration
Follow the steps below to register and activate your SIP account.
1 Click Connection Status > System Info to check if your SIP account has been registered
successfully. If the status is Not Registered, check your Internet connection and click Register to
register your SIP account.
Tutorial: Registration Status
3.4.1.3 Analog Phone Configuration
1 Click VoIP > Phone to open the Phone Device screen. Click the Edit icon next to Analog Phone
1 to configure the first phone port.
2 Select SIP 1 from the SIP Account in the SIP Account to Make Outgoing Call section to have
the phone (connected to the first phone port) use the registered SIP 1 account to make outgoing
calls.
3 Select the SIP 1 check box in the SIP Account(s) to Receive Incoming Call section to have the
phone (connected to the first phone port) receive phone calls for the SIP 3 account.
4 Click Apply to save your changes.
To Next Page
Loading...