Chapter 9 VLAN
GS2200-8/24 User’s Guide
88
9.3 Configure a Static VLAN
Use this screen to configure and view 802.1Q VLAN parameters for the Switch. To configure a static
VLAN, click Static VLAN in the VLAN Status screen to display the screen as shown next.
Figure 53 Advanced Application > VLAN > Static VLAN
The following table describes the related labels in this screen.
Table 19 Advanced Application > VLAN > Static VLAN
LABEL DESCRIPTION
ACTIVE Select this check box to activate the VLAN settings.
Name Enter a descriptive name for the VLAN group for identification purposes. This name
consists of up to 64 printable characters.
VLAN Group ID Enter the VLAN ID for this static entry; the valid range is between 1 and 4094.
Port The port number identifies the port you are configuring.
To Next Page
Loading...
