ZyXEL Communications GS1920-48v2 - Page 179

Chapter 31 Link Layer Discovery Protocol (LLDP)
GS1920v2 Series User’s Guide
179
Figure 121 PORT > LLDP > LLDP > LLDP Remote Status > LLDP Remote Port Status Detail (Dot1 and Dot3
TLV)
The following table describes the labels in the Dot1 and Dot3 parts of the screen.
Table 81 PORT > LLDP > LLDP > LLDP Remote Status > LLDP Remote Port Status Detail (Dot1 and Dot3
TLV)
LABEL DESCRIPTION
Dot1 TLV
Port VLAN ID
TLV
Port VLAN ID – This displays the VLAN ID of this port on the remote device.
Vlan Name TLV This shows the VLAN ID and name for remote device port.
•VLAN ID
• VLAN Name
Protocol
Identity TLV
Protocol ID – The Protocol Identity TLV allows the Switch to advertise the particular protocols
that are accessible through its port.
Port-Protocol
VLAN ID TLV
This displays the IEEE 802.1 Port Protocol VLAN ID TLV, which indicates whether the VLAN ID
and whether it is enabled and supported on the port of remote Switch which sent the
LLDPDU.
• Port-Protocol VLAN ID
• Port-Protocol VLAN ID Supported
• Port-Protocol VLAN ID Enabled
Dot3 TLV