Need help?Do you have a question about the ZyXEL Communications GS1900-10HP and is the answer not in the manual?
General| Brand | ZyXEL Communications |
|---|---|
| Model | GS1900-10HP |
| Category | Switch |
| Language | English |
Provides default IP address, username, and password for accessing the switch.
Lists essential safety measures to observe before and during the use of the switch.
Provides steps to reset the switch to factory defaults using the reset button.
Details the steps required to access the switch's Web Configurator interface.
Guides on viewing the switch's loop guard status for individual ports.
Details how port security allows only specific MAC addresses to pass through a port.
Guides on viewing 802.1x security settings and authenticated hosts.
Details the requirement for an IP address for network management and default settings.
Guides on viewing IPv4 interface status and management addresses.
Guides on viewing and editing general port settings.
Covers Power over Ethernet (PoE) global and port settings for power delivery.
Guides on configuring global PoE settings like power management mode and pre-allocation.
Guides on viewing and configuring general VLAN settings.
Guides on configuring global LAG settings, LAG management, and port settings.
Details how to configure global link aggregation control protocol and load balancing.
Guides on configuring global loop guard settings.
Details how to configure port security to control MAC address access.
Guides on configuring global port security settings.
Guides on upgrading the switch's firmware using downloaded files or online methods.
Covers backing up switch configurations and log files to a server or computer.
Covers resetting the switch to its original factory settings.
Addresses issues related to power, hardware connections, and LED behavior.
Provides solutions for problems related to accessing and logging into the switch.
To Next Page