ZyXEL Communications GS1900-10HP - Bandwidth Management; Bandwidth Control

Chapter 8 Monitor: Port
GS1900 Series User’s Guide
73
8.4 Ba ndwidth Ma na g e m e nt
This section shows you the maximum bandwidth using the Ba ndwidth Ma na g e m e nt screen. Bandwidth
management shows the maximum allowable bandwidth for incoming and/or out-going traffic flows on
a port.
8.4.1 Ba ndwidth Co ntro l
Use this screen to view the Switch’s bandwidth control in egress global burst and port rate.
An egress port is an outgoing port, that is, a port through which a data packet leaves for both ports. An
ingress port is an incoming port, that is, a port through which a data packet enters.
Click Mo nitor > Po rt > Ba ndwidth Ma na g e m e nt > Ba ndwidth C o ntro l to access this screen.
Fig ure 76 Monitor > Port > Bandwidth Management > Bandwidth Control
Each field is described in the following table.
Table 30 Monitor > Port > Bandwidth Management > Bandwidth Control
LABEL DESCRIPTIO N
Bandwidth Control
Egress Global
Burst
This field specifies the current egress burst size in bytes all ports.
Port Rate View the maximum bandwidth allowed in kilobits per second (Kbps) for the traffic flow on a
port.
Port This field displays the port number.