ZyXEL Communications GS1900-10HP - Statistics

Chapter 13 Monitor: Multicast
GS1900 Series User’s Guide
91
13.2.2 Sta tistic s
Use this screen to view the Switch’s IGMP statistics. Click Mo nito r > Multic a st > IG MP > Sta tistic s to access
this screen.
Fig ure 92 Monitor > Multicast > IGMP > Statistics
Each field is described in the following table.
Router Ports Auto
Learn
Displays whether the router ports are auto learn or not.
Query
Retry Displays the number of retry.
Interval Displays the number (in seconds) for the time interval.
Max. Response
Interval (sec)
Displays the maximum response (in seconds) for the time interval.
Last Member Query
Count Displays the number of count.
Interval (sec) Displays the in seconds for the time interval.
Querier Allows the Switch to send IGMP General Query messages to the VLANs with the multicast
hosts attached.
Status This field displays the entry as querier or non-querier.
Version This field displays the entry querier version.
IP This field displays the entry querier IP address.
Total Entries This field displays the number of total entries.
Table 40 Monitor > Multicast > IGMP > VLAN (continued)
LABEL DESCRIPTION
Table 41 Monitor > Multicast > IGMP > Statistics
LABEL DESCRIPTIO N
IGMP Statistics
Port This field displays a port number.
Total RX This field displays the total amount of RX.