GS1900 Series User’s Guide
231
C HAPTER 33
Ma inte na nc e
33.1 Firmwa re Upg ra de
33.1.1 O ve rvie w
Firmware updates contain bug fixes and fixes for security vulnerabilities. It is recommended to keep the
Switch’s firmware up to date. You can upgrade the Switch’s firmware manually using a file downloaded
on your computer or through the online Web Configurator.
Note: Be sure to upload the correct model firmware as uploading the wrong model firmware
may damage your device.
From the Ma inte na nc e screen, display the Uploa d screen as shown next. Use this screen to upgrade the
Switch’s firmware.
Fig ure 238 Maintenance > Firmware > Upload
The following table describes the labels under Uplo a d.
33.1.2 Upg ra de the firm wa re fro m a file o n a se rve r
Follow the steps below to upgrade the firmware from a TFTP server.
Table 186 Maintenance > Firmware > Upload
LABEL DESCRIPTIO N
Upload
Method Choose HTTP to use the Web Configurator for the firmware upload. Alternatively, choose TFTP to
download the firmware from a TFTP server.
Server IP To download from a TFTP server, enter the TFTP server IP address.
File Name Enter the name of the firmware file on the TFTP server.
Image Choose Ba c kup to upload the firmware file as the backup image. Alternatively, choose Ac tive
to upload the firmware file as the active image.
File Path Browse to the path on your computer to upload the firmware you want as the active image.
To Next Page
Loading...
