ZyXEL Communications NSA221 - Chapter 1 Applications; NAS Starter Utility; NAS Starter Utility Installation

1. NAS Starter Utility
1.1 NAS Starter Utility Installation
After you install a new hard drive on the NSA221, please make sure to use the NAS
Starter Utility to discover and access the NSA221 to assign an IP address by DHCP or
a static IP. The steps are as below.
a. Double-click setup.exe.
b. Click “Next” to begin the installation.
Figure 1. Click “Next”
Figure 2. Select a folder to install the utility.
Figure 3. Click “Install”
Figure 4. NSU Installation is processing.
1
Chapter 1 Applications