Figure 5. Installation is finished.
1.2 NSA325 Initialization
After successful installation, click the “NAS Starter Utility”. The first screen of
NSU is trying to discovery for NSA devices. Click the “NAS Seeker”, you can
choose devices which do you want to connect.
Figure 6. NAS Discovery. Figure 7. NAS Seeker
Then click Run the Initialization Wizard to set up the NAS325, and enter the
username and password to start the initialization. The default username is admin
and the password is 1234. These two words are case sensitive.
Figure 8. Run Initialization Figure 9. Enter username and password.
To Next Page
Loading...
