Chapter 8 Storage
Media Server User’s Guide
163
Note: Once you create the first volume on the NSA, it is recommended to restart the NSA
for better performance.
8.4 Editing a Volume
Click an internal volume’s Edit icon in the Storage screen as shown in Figure 73 on page 159 to
open the following screen. Use this screen to change the volume’s name.
Figure 76 Storage > Edit
The following table describes the labels in this screen.
Table 21 Storage > Edit
LABEL DESCRIPTION
Volume Name For an internal volume, type a volume name from 1 to 31 characters. To avoid confusion, it is
highly recommended that each volume use a unique name.
Acceptable characters are all alphanumeric characters and " " [spaces], "_" [underscores],
and "." [periods].
The first character must be alphanumeric (A-Z 0-9).
The last character cannot be a space " ".
For an external volume, type a volume name from 1 to 32 single-byte (no Chinese
characters allowed for example) ASCII characters. The name cannot be the same as another
existing external volume.
Apply Click this to save your changes and rename the volume.
Cancel Click this to close this screen without saving your changes.
To Next Page
Loading...
