To Next PageTo Next Page
Need help?Do you have a question about the ZyXEL Communications NWA1123-AC Pro and is the answer not in the manual?
General| Internal | No |
|---|---|
| Placement | Ceiling, Wall |
| Certification | FCC part 15C, FCC part 15E, ETSI EN 300 328, EN 301 893, LP0002 |
| Product color | White |
| 2.4 GHz | Yes |
| Modulation | 16-QAM, 64-QAM, 256-QAM, BPSK, CCK, DPSK, DQPSK, QPSK |
| Channel bandwidth | 80 MHz |
| Networking standards | IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.3ab, IEEE 802.3u |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Maximum data transfer rate | 1300 Mbit/s |
| Security algorithms | 802.1x RADIUS, EAP-AKA, EAP-FAST, EAP-PEAP, EAP-SIM, EAP-TLS, EAP-TTLS, SNMP, SSH, WEP, WPA, WPA2-Enterprise, WPA2-PSK |
| Number of SSID supported | 16 |
| Service Set Identifier (SSID) features | SSID broadcast on/off |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Antennas quantity | 3 |
| Antenna gain level (max) | 5 dBi |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 Hz |
| Package depth | 235 mm |
| Package width | 240 mm |
| Package height | 100 mm |
| Package weight | 1210 g |
Weight and Dimensions| Depth | 191.7 mm |
|---|---|
| Width | 203.9 mm |
| Height | 34.7 mm |
| Weight | 445 g |
Provides an overview of the user guide and covers various Zyxel Device models and management methods.
Compares features across different Zyxel Device models in tabular format.
Describes various roles a Zyxel Device can perform within a network, such as AP, RF monitor, root AP, and repeater.
Illustrates sample scenarios and topologies for using Zyxel Devices, including MBSSID and BandFlex.
Explains the different management modes for Zyxel Devices: NCC, AP Controller, and Standalone.
Details the procedures for switching between different management modes like Standalone-to-NCC and AC-to-Standalone.
Introduces the ZON Utility for efficient network deployment and management, covering requirements and usage.
Outlines the methods to access and configure the Zyxel Device, including Web Configurator, NCC, and AP Controller.
Provides recommendations for effective and secure management practices for Zyxel Devices.
Explains the importance and procedure for proper grounding of specific Zyxel Device models for safety.
Lists Zyxel Device models that feature single LEDs and describes LED control capabilities.
Details the behavior and control of single LEDs on Zyxel Devices, referencing LED Suppression and Locator menus.
Describes Zyxel Device models with multiple LEDs and their control via Suppression and Locator features.
Introduces the Web Configurator as an HTML-based interface for device setup and management.
Provides instructions on how to connect to and access the Zyxel Device's Web Configurator.
Explains the layout and navigation of the Web Configurator, including Title Bar, Navigation Panel, and Main Window.
Describes the Zyxel Device's standalone mode and its management via the web configurator.
Details methods for starting, stopping, and rebooting the Zyxel Device, emphasizing proper shutdown procedures.
Explains the Dashboard's function to display device information, status, and resource usage in widgets.
Guides users on how to access the Setup Wizard for initial device configuration.
Details the steps involved in using the Setup Wizard for configuring IP address, time, radio, and SSID settings.
Introduces the Monitor screens for checking status and statistics information.
Defines key terms and concepts related to monitoring, such as Rogue AP and Friendly AP.
Displays general Ethernet interface information and packet statistics.
Provides statistics for the Zyxel Device's WiFi radio transmitters.
Displays statistics pertaining to the associated stations or WiFi clients.
Shows WDS traffic statistics between the Zyxel Device and root APs or repeaters.
Displays information about surrounding APs that can be marked as Rogue or Friendly.
Displays the Zyxel Device's current log messages, with options for filtering and viewing.
Covers configuration of management IP address and VLAN settings.
Guides users on configuring the IP address for their Zyxel Device.
Explains how to configure the Zyxel Device’s VLAN settings.
Details how to enable or disable traffic storm control on the Zyxel Device.
Covers configuration of Zyxel Device’s AC Discovery settings for management by an AC.
Explains how to configure proxy server settings for Zyxel Device's Nebula Control Center (NCC) discovery.
Discusses configuration of WiFi network settings for Zyxel Devices.
Allows management of Zyxel Device's general WiFi settings.
Enables Rogue AP Detection and import/export of rogue or friendly AP lists.
Configures wireless network traffic load balancing between APs.
Covers configuration of dynamic radio channel selection.
Provides additional technical information on wireless features like Dynamic Channel Selection.
Explains configuring iBeacon advertising settings for Zyxel Devices supporting Bluetooth Low Energy (BLE).
Configures up to five beacon IDs for inclusion in the advertising packet.
Covers setting up user accounts and user settings for the Zyxel Device.
Provides a summary of all user accounts and allows adding/editing users.
Controls default settings, login settings, lockout settings, and other user settings.
Explains how to configure preset profiles for Zyxel Devices, including Radio, SSID, and Security profiles.
Allows creation of radio profiles for Zyxel Device radio transmitters.
Configures SSID profiles, including SSID List and Add/Edit SSID Profile.
Manages wireless security configurations for SSIDs, including Add/Edit Security Profile.
Allows creation and management of MAC filtering profiles for SSIDs.
Covers Layer-2 isolation profiles to prevent WiFi clients from communicating with each other.
Describes setting up monitor mode configurations for scanning wireless devices.
Allows creation of monitor mode configurations for Zyxel Device APs.
Explains configuring WDS (Wireless Distribution System) profiles to form WDS with other APs.
Manages and creates WDS profiles that can be used by APs.
Explains how Zyxel Device uses certificates for user authentication.
Provides a summary list of certificates and certification requests, allowing generation and import.
Allows setting Zyxel Device to accept trusted certificates and managing them.
Provides technical details on OCSP (Online Certificate Status Protocol).
Covers configuration of general Zyxel Device settings.
Configures a unique name for the Zyxel Device on the network.
Details configuration of the Zyxel Device’s power settings.
Explains manual and automatic (NTP server) configuration of date and time settings.
Discusses secure and insecure management access via HTTP, HTTPS, and SSH.
Covers using SSH for secure command-line access to the Zyxel Device.
Specifies FTP settings for firmware and configuration file transfer.
Details SNMP agent functionality for network management and monitoring.
Covers configuration of daily reporting and log settings.
Configures how and where to send daily reports and which reports to include.
Specifies log settings, including e-mail configurations and remote syslog servers.
Introduces configuration files and shell scripts for Zyxel Device settings.
Explains storing, running, and managing configuration files, including download/upload.
Covers checking current firmware version and uploading firmware.
Details creating, storing, and running shell script files for Zyxel Device commands.
Explains using diagnostics screens for troubleshooting.
Guides generating a file with Zyxel Device configuration and diagnostic information.
Enables remote packet captures on wired or wireless interfaces using an external analyzer.
Describes how Zyxel Device LEDs can be controlled via Locator and Suppression features.
Allows control over how device LEDs behave after the Zyxel Device is ready.
Identifies the location of Zyxel Devices within a network using an LED feature.
Explains adjusting coverage based on antenna orientation.
Allows adjustment of antenna orientation settings for better coverage.
Provides information about restarting the Zyxel Device.
Allows remote users to restart the Zyxel Device via the Web Configurator or CLI.
Explains how to shut down the Zyxel Device safely.
Provides instructions for shutting down the Zyxel Device via Web Configurator or CLI.
Describes Zyxel Device management and provisioning via Nebula Control Center (NCC).
Lists accessible screens in the Web Configurator when managed by NCC.
Displays general AP information and client information in rearrangeable widgets.
Covers configuring management IP address and VLAN settings in cloud mode.
Guides users on configuring the LAN IP address for their Zyxel Device.
Details how to configure the Zyxel Device’s VLAN settings.
Covers managing shell scripts, diagnostic files, and log messages in cloud mode.
Explains using shell scripts for Zyxel Device commands, including storage and upload.
Guides generating a file with Zyxel Device configuration and diagnostic information for support.
Enables capturing network traffic for analysis using external packet analyzers.
Displays current log messages when the device is disconnected from NCC.
Provides suggestions to solve potential problems encountered with the Zyxel Device.
Troubleshoots issues related to device power, hardware connections, and LED behavior.
Addresses problems with forgotten IP addresses, login screen access, and password recovery.
Troubleshoots issues where clients cannot access the Internet or experience slow connections.
Addresses issues with slow or intermittent WiFi connections and potential interference.
Provides instructions for resetting the Zyxel Device to factory defaults.
Directs users to additional resources for troubleshooting suggestions.
Guides on exporting certificates from the device's Web Configurator.
Provides steps to install a stand-alone certificate file as a trusted root.
Instructions for removing a public key certificate in Google Chrome.
Instructions for removing a public key certificate in Mozilla Firefox.
Introduces IPv6 features and IP address size increase.
Explains the format and abbreviation methods for IPv6 addresses.
Details how IPv6 addresses can be uniquely and automatically generated without a DHCP server.
Describes the DHCPv6 protocol for assigning IPv6 network addresses and configuration.
Lists information needed when contacting customer support.
Provides contact information for Zyxel's worldwide corporate offices.
States the copyright information for the publication.
Provides liability disclaimers regarding the use of products and software.
Includes FCC EMC Statement, FCC Radiation Exposure Statement, and country-specific notices.
Details antenna models, types, connectors, and gain specifications.
