ENGLISH
5
4. You will need to restart your computer after installing
the ZyXEL utility and driver. Make sure you have
saved your work before continuing.
Install the Hardware
1. Locate an available USB port on the computer.
2. Remove the protective cap to expose the USB
connector. Insert the NWD2105 into an available
USB port on the computer.
The NWD2105’s LED (light) turns on if it is properly
inserted.
Never bend, twist or force the NWD2105 into the port. If
there is not enough space to attach the NWD2105, use
the included USB cable.
To Next Page
Loading...
