Need help?Do you have a question about the ZyXEL Communications PLA4205 and is the answer not in the manual?
Power| power rating | 100-240 V AC, 50/60 Hz |
|---|---|
| power consumption (full operation) | 5 Watt max. |
| power consumption (power-saving mode) | 1 Watt max. |
Operating Environment| operating temperature | 0°C to 40°C (32°F to 104°F) |
|---|---|
| operating humidity | 20% to 90% (Non-condensing) |
| storage temperature | -20°C to 70°C (-4°F to 158°F) |
| storage humidity | 20% to 95% (Non-condensing) |
Connectivity| ethernet interface | one 10/100/1000 Mbp RJ-45 connector with auto MDI/MDIX support |
|---|---|
| frequency band | 2 MHz ~ 67.5 MHz |
| range over power line | up to 300 meters |
Weight and Dimensions| item dimensions | 71 x 65 x 95 mm (2.79” x 2.56” x 3.74”) |
|---|
Provides a general introduction to the PLA4205 HomePlug AV compliant powerline adapter.
Explains how to use the PLA4205 to extend an existing Ethernet or broadband connection using power outlets.
Details methods for managing the PLA4205, including using the ENCRYPT button and the configuration utility.
Discusses the importance of setting up security on your powerline network and explains password types.
Describes how to implement multiple powerline networks on a single powerline circuit.
Outlines the steps involved in installing the PLA42xx Series Configuration Utility.
Provides step-by-step instructions for installing the .NET Framework and the PLA42xx Series Configuration Utility.
Explains the Low Power mode feature of the PLA4205 and how it operates.
Introduces the ENCRYPT button functionality for setting up secure powerline connections.
Guides users on how to set up a secure HomePlug AV network using the ENCRYPT button.
Explains how to use the ENCRYPT button to set up multiple, separate powerline networks.
Summarizes the actions and light behaviors associated with pressing the ENCRYPT button for different durations.
Introduces the Configuration Utility for securing, managing, and setting up QoS on the powerline network.
Provides instructions on how to launch the PLA42xx Series Configuration Utility.
Describes the Configuration screen for viewing devices, managing settings, and setting up a secure network.
Explains how to use the Firmware screen to update the PLA4205's firmware.
Details how to view communication rates between powerline adapters using the Network Info screen.
Covers configuring priority settings for network traffic using the Advanced screen.
Allows viewing of the configuration utility and firmware version of the connected PLA4205.
Introduces a tutorial for expanding an existing powerline network or creating a new one.
Defines key terms like Network Name and DAK Password used in powerline networking.
Guides on plugging in and connecting a powerline adapter to a computer to access it.
Explains the process of adding a new powerline adapter to an existing network.
Details how to set up a new, separate powerline network using new adapters.
Guides on splitting an existing powerline network into two distinct networks.
Describes the behavior of the LEDs on the PLA4205 for status indication.
Provides solutions for issues related to the device not turning on or lights not functioning.
Offers troubleshooting steps for errors or display issues with the configuration utility.
Addresses common issues like weak signal strength on the powerline network.
Troubleshoots specific issues encountered when using the ENCRYPT button.
Details FCC compliance and guidelines for minimizing radio interference.
Provides instructions on how to view product certifications on the ZyXEL website.
Outlines the terms and conditions of the ZyXEL limited product warranty.
To Next Page
