Need help?Do you have a question about the ZyXEL Communications PLA-401 V3 and is the answer not in the manual?
General| Type | Powerline Adapter |
|---|---|
| Model | PLA-401 V3 |
| Standards | HomePlug AV |
| Data Rate | Up to 500 Mbps |
| Encryption | 128-bit AES |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% to 90% (Non-condensing) |
| Interface | 1 x 10/100 Mbps Ethernet |
Explains how to use the PLA-401 v3 to extend network connectivity using electrical outlets.
Covers the importance of security and types of passwords (Network Name, DAK) for network protection.
Provides step-by-step instructions for installing the PLA-4xx Series Configuration Utility.
Details how to use the tool to upgrade the PLA-401 v3 firmware to the latest version.
Guides through using the ENCRYPT button to establish a secure HomePlug AV network.
Explains encryption and network names for securing data transmission between powerline adapters.
Describes the Configuration screen for viewing devices and changing network names.
Explains how to change the network name (NMK) to identify and secure the powerline network.
Explains how to use the tool to detect firmware versions on network devices.
Provides instructions for upgrading firmware using the dedicated upgrade tool.
Explains how to add a new powerline adapter to expand an existing network.
Guides on creating a new, separate powerline network using new adapters.
Offers solutions for common issues encountered during network setup, focusing on HomePlug LED indicators.
Provides troubleshooting steps for issues like the device not turning on or lights not illuminating.
Addresses issues related to the configuration utility, such as installation errors or device detection failures.
Offers solutions for weak network signals, including placement and wiring considerations.
Troubleshoots specific issues related to the ENCRYPT button's functionality and behavior.
To Next Page
