Chapter 4 The ENCRYPT Button
PLA-401 v3 User’s Guide
31
8 Then repeat steps 4 and 5 in this section using any powerline device (A or B) you
have connected using ENCRYPT and the powerline device you want to connect
(C). You must use the ENCRYPT button on both devices.
Figure 10 Adding More Powerline Adapters to Your Network
9 If you disconnected your computer or modem (or any other networking product
connected to your powerline device) in step 1 of this section, you can now
reconnect them.
This sets up your powerline network between your powerline devices.
4.3 Setting Up Multiple Networks
You can use the ENCRYPT button to set up multiple powerline networks using
your existing powerline network.
A
B
OR
C
AB
To Next Page
Loading...
