Chapter 4 The ENCRYPT Button
PLA-401 v3 User’s Guide
32
For example, you have already set up a powerline network in your home (A) which
accesses a printer (B). Now you want a separate powerline network connection
from your laptop to your printer (C).
Figure 11 One Existing Powerline Network
1 Click the ENCRYPT button on (A) for more than 10 seconds until the power ( )
light flashes. This disconnects (A) from (B).
2 Click the ENCRYPT button on (A) and (C) for 1~2 seconds and within two
minutes of each other.
3 Wait for about one minute while (A) and (C) connect.
A
B
C
To Next Page
Loading...
