Chapter 4 The ENCRYPT Button
PLA-401 v3 User’s Guide
33
4 Check the LEDs on both (A) and (C). When the power ( ) and HomePlug ( )
lights stop blinking and the power ( ) light shines steadily, the devices are
connected.
Figure 12 Two Separate Powerline Networks
Congratulations. You now have two separate powerline networks as shown above.
If the HomePlug ( ) lights on both powerline devices do not light up, the
powerline devices are not connected. Repeat the connection process, making
certain you press the ENCRYPT buttons for the correct time and within two
minutes of each other. If that does not work see Section 8.5 on page 76 for
suggestions.
A
C
B
To Next Page
Loading...
