ZyXEL Communications PLA4201 - Page 37

Chapter 5 Powerline Network Setup Tutorial
PLA4201 User’s Guide
37
• Then type the new network name in the Network Name field.
Figure 29 Adding an Adapter to Your New Network
4 Click Save.
• If you do not type the DAK password or type it incorrectly either of the following pop-ups
appear. Click OK and type the DAK Password correctly in the DAK Password field.
Figure 30 Incorrect DAK or No DAK
• If you have correctly entered the DAK Password, click OK on the pop-up.
Figure 31 Correct DAK
B
A