126 Status Registers & Result Codes
** When more than one type of Distinctive Ring is
turned on (S40b3-6) ‘RING n’ will be reported,
n=Ring Type # (1-4)
Result Code Chart Symbol Reference:
V Supported
% Reports the DTE Speed as: <cr><lf>CONNECT
DTE_Speed<cr><lf>
@ CONNECT DTE_Speed/Protocol
DCE_Speed/Error_Control †
Example: CONNECT 38400/V.32bis
14400/V.42bis
$ <cr><lf>CONNECT DCE_Speed[/Error_Code]<cr><lf>
Example: CONNECT 14400/ARQ
# CONNECT DCE _Speed/Error_Code/Error_Control †
Example: CONNECT 14400/ARQ/ MNP5
† Data compression included. 'SREJ' is appended if a V.42
connection with selective reject is established.
Result Code Field Descriptions
Field Name Possible Values
Error_Code NONE, ARQ
Error_Control LAPM, V42
(This field will not show if no error control is
negotiated)
Data_Compression V42b
DCE_Speed All possible DCE speeds supported
DTE_Speed All possible DTE speeds supported
To Next Page
Loading...
