ZyXEL Communications U-336S - Page 85

Fax Operation 71
Command Value Description
+FDCS=vr,br,wd
,ln,df,ec,bf,st
Current session parameter; refer to
+FDCC command.
+FDIS=vr,br,wd,l
n,df,ec,bf,st
Current session negotiation parameter;
refer to +FDCC command.
+FDR Receive phase C data command; initiates
document reception.
+FDT=df,vr,wd,
ln
Transmit phase C data command: release
the DCE to proceed with negotiation.
+FET=n End of page or document command:
n=0 More pages; same document.
n=1 End of document; another document
follows.
n=2 No more pages or documents.
n=4 Procedure interrupt; another page
follows.
n=5 Procedure interrupt; end of document,
another document follows.
n=6 Procedure interrupt; end of document.
+FK Regular fax abort command.
+FLID="string" Local ID string parameter.
+FLO=n Flow control options:
n=0 No flow control.
n=1 Set XON/XOFF software flow control.
n=2 Set CTS/RTS hardware flow control.
+FLPL=n Document for polling command:
n=0 The DTE has no document available for
polling.
n=1 Indicate a document available for
polling.
+FMDL? Request DCE model .