ZyXEL Communications U-336S - Page 87

Fax Operation 73
Command Value Description
n=1 Enable polling.
All other +F commands are not supported, but the modem will respond
OK. In many cases this means "don't care." See PN 2388 for
command details.
Class 2 Command Responses
Response Value
Function and Description
+FCFR Confirmation .
+FCIG:"string" Report remote ID response CIG.
+FCON Facsimile connection response.
+FCSI:"string" Report remote ID response CSI.
+FDCS:vr,br,wd,l
n,df,ec,bf,st
Report session parameters response;
refer to +FDCC=.... command.
+FDIS:vr,br,wd,ln
,df,ec,bf,st
Report session negotiation parameters
response; refer to +FDCC=....
command.
+FDTC:vr,br,wd,l
n,df,ec,bf,st
Report remote capabilities response;
refer to +FDCC=.... command.
+FET:n Post page message response; refer to the
+FET=n command.
+FHNG:n Call termination status response.
n=00 Normal and proper end of connection.
n=10 Transmit error on phase A hang up code.
n=20 Transmit error on phase B hang up code.
n=40 Transmit error on phase C hang up code.
n=50 Transmit error on phase D hang up code.
n=70 Receive error on phase B hang up code.
n=90 Receive error on phase C hang up code.
n=100
Receive error on phase D hang up code.
+FNSC:"HEX string" Report the non-standard facilities
command frame.