Type the Rule Name used to identify this VPN connection (and VPN gateway).
You may use 1-31 alphanumeric characters. This value is case-sensitive. Select the
rule to be Site-to-site with Dynamic Peer. Click Next.
Quick Setup > VPN Setup Wizard > Wizard Type > VPN Settings (Scenario)
Type a secure Pre-Shared Key (8-32 characters). Then, set Local Policy to be the
IP address range of the network connected to the ZyWALL/USG and Remote
Policy to be the IP address range of the network connected to the peer
ZYWALL/USG.
To Next Page
Loading...
