ZyXEL Communications VMG1312-B10A - Set up a Wireless Network; Using Wireless Protected Setup (WPS)

66
If you want to have the VMG1312-B10A use 3G as your WAN or as a backup
when the Ethernet WAN connection fails, see your User’s Guide for how to
use the Network Setting > Broadband > 3G Backup screen to set up the
3G WAN connection.
Set Up a Wireless Network
You can set up a wireless network using the following methods:
Using Wireless Protected Setup (WPS)
Press the WPS button on the VMG1312-B10A’s back panel for more
than 5 seconds to turn the WPS function on.
Follow these steps to add a WPS-enabled device to the wireless
network using the WPS/WLAN button.
Place the devices you
want to connect near one
another.
Press the WPS button on
the VMG1312-B10A.
The WPS light blinks
green and orange
Press the WPS button on
a compatible device
within 2 minutes of
pressing the button on
the VMG1312-B10A.
The WPS light on the
VMG1312-B10A shines
steadily when connected.
1
2
3