Quick Start Guide
ENGLISH
1
2
1
2
Drill two holes at the distance of 104.9mm
apart. Insert screw anchors and screws
(not provided) into the holes.
Attach the bracket to your VMG3625-T20A
with the bracket holes facing down.
Hang it on the screws.
3
Wireless Setup
WPS
Press the WPS button until the WiFi 2.4G
and 5G LEDs light up in orange.
Press the WPS button on the client.If the
WPS method fails,perform the No WPS
method.
No WPS
The SSID and Wireless key are on the
device sticker.
Find the device with this SSID. Enter the
Wireless key to connect.
1
2
3
Connect the stand with the bracket holes
facing up.
Place the device vertically on a smooth
level surface.
1
2
WiFi 2.4G
ON
WiFi 5G
ON
/ WPS
Wireless Setup
/ NO WPS
1
1
2
2
More than 5 seconds.
within
minutes
2
SSID (2.4GHz)
SSID (5-GHz)
Wireless key
Zyxel_xxxx
Zyxel_xxxx_5G
XXXXXXXXXX
Desktop Installation
x2x2
SSID (2.4GHz)
Wireless key
XXXXXXXXXX
Zyxel_xxxx
1
Wall Mounting
2
1
2
104.9mm
Copyright © 2017 Zyxel Communications Corp. All Rights Reserved.
See the User’s Guide at www.zyxel.com for more information, including customer support and safety warnings.
2/2
VMG3625-T20A
Dual-Band Wireless AC/N Combo
WAN Gigabit Gateway with USB
WPS ON
To Previous Page
Loading...
